kube-scheduler
Synopsis
The Kubernetes scheduler is a policy-rich, topology-aware, workload-specific function that significantly impacts availability, performance, and capacity. The scheduler needs to take into account individual and collective resource requirements, quality of service requirements, hardware/software/policy constraints, affinity and anti-affinity specifications, data locality, inter-workload interference, deadlines, and so on. Workload-specific requirements will be exposed through the API as necessary.
kube-scheduler [flags]
Options
| --add-dir-header | |
| If true, adds the file directory to the header | |
| --address string Default: "0.0.0.0" | |
| DEPRECATED: the IP address on which to listen for the --port port (set to 0.0.0.0 for all IPv4 interfaces and :: for all IPv6 interfaces). See --bind-address instead. | |
| --algorithm-provider string | |
| DEPRECATED: the scheduling algorithm provider to use, one of: ClusterAutoscalerProvider | DefaultProvider | |
| --alsologtostderr | |
| log to standard error as well as files | |
| --authentication-kubeconfig string | |
| kubeconfig file pointing at the 'core' kubernetes server with enough rights to create tokenaccessreviews.authentication.k8s.io. This is optional. If empty, all token requests are considered to be anonymous and no client CA is looked up in the cluster. | |
| --authentication-skip-lookup | |
| If false, the authentication-kubeconfig will be used to lookup missing authentication configuration from the cluster. | |
| --authentication-token-webhook-cache-ttl duration Default: 10s | |
| The duration to cache responses from the webhook token authenticator. | |
| --authentication-tolerate-lookup-failure Default: true | |
| If true, failures to look up missing authentication configuration from the cluster are not considered fatal. Note that this can result in authentication that treats all requests as anonymous. | |
| --authorization-always-allow-paths stringSlice Default: [/healthz] | |
| A list of HTTP paths to skip during authorization, i.e. these are authorized without contacting the 'core' kubernetes server. | |
| --authorization-kubeconfig string | |
| kubeconfig file pointing at the 'core' kubernetes server with enough rights to create subjectaccessreviews.authorization.k8s.io. This is optional. If empty, all requests not skipped by authorization are forbidden. | |
| --authorization-webhook-cache-authorized-ttl duration Default: 10s | |
| The duration to cache 'authorized' responses from the webhook authorizer. | |
| --authorization-webhook-cache-unauthorized-ttl duration Default: 10s | |
| The duration to cache 'unauthorized' responses from the webhook authorizer. | |
| --azure-container-registry-config string | |
| Path to the file containing Azure container registry configuration information. | |
| --bind-address ip Default: 0.0.0.0 | |
| The IP address on which to listen for the --secure-port port. The associated interface(s) must be reachable by the rest of the cluster, and by CLI/web clients. If blank, all interfaces will be used (0.0.0.0 for all IPv4 interfaces and :: for all IPv6 interfaces). | |
| --cert-dir string | |
| The directory where the TLS certs are located. If --tls-cert-file and --tls-private-key-file are provided, this flag will be ignored. | |
| --client-ca-file string | |
| If set, any request presenting a client certificate signed by one of the authorities in the client-ca-file is authenticated with an identity corresponding to the CommonName of the client certificate. | |
| --config string | |
| The path to the configuration file. Flags override values in this file. | |
| --contention-profiling | |
| DEPRECATED: enable lock contention profiling, if profiling is enabled | |
| --feature-gates mapStringBool | |
| A set of key=value pairs that describe feature gates for alpha/experimental features. Options are: APIListChunking=true|false (BETA - default=true) APIResponseCompression=true|false (BETA - default=true) AllAlpha=true|false (ALPHA - default=false) AppArmor=true|false (BETA - default=true) AttachVolumeLimit=true|false (BETA - default=true) BalanceAttachedNodeVolumes=true|false (ALPHA - default=false) BlockVolume=true|false (BETA - default=true) BoundServiceAccountTokenVolume=true|false (ALPHA - default=false) CPUManager=true|false (BETA - default=true) CRIContainerLogRotation=true|false (BETA - default=true) CSIBlockVolume=true|false (BETA - default=true) CSIDriverRegistry=true|false (BETA - default=true) CSIInlineVolume=true|false (BETA - default=true) CSIMigration=true|false (ALPHA - default=false) CSIMigrationAWS=true|false (ALPHA - default=false) CSIMigrationAzureDisk=true|false (ALPHA - default=false) CSIMigrationAzureFile=true|false (ALPHA - default=false) CSIMigrationGCE=true|false (ALPHA - default=false) CSIMigrationOpenStack=true|false (ALPHA - default=false) CSINodeInfo=true|false (BETA - default=true) CustomCPUCFSQuotaPeriod=true|false (ALPHA - default=false) CustomResourceDefaulting=true|false (BETA - default=true) DevicePlugins=true|false (BETA - default=true) DryRun=true|false (BETA - default=true) DynamicAuditing=true|false (ALPHA - default=false) DynamicKubeletConfig=true|false (BETA - default=true) EndpointSlice=true|false (ALPHA - default=false) EphemeralContainers=true|false (ALPHA - default=false) EvenPodsSpread=true|false (ALPHA - default=false) ExpandCSIVolumes=true|false (BETA - default=true) ExpandInUsePersistentVolumes=true|false (BETA - default=true) ExpandPersistentVolumes=true|false (BETA - default=true) ExperimentalHostUserNamespaceDefaulting=true|false (BETA - default=false) HPAScaleToZero=true|false (ALPHA - default=false) HyperVContainer=true|false (ALPHA - default=false) IPv6DualStack=true|false (ALPHA - default=false) KubeletPodResources=true|false (BETA - default=true) LegacyNodeRoleBehavior=true|false (ALPHA - default=true) LocalStorageCapacityIsolation=true|false (BETA - default=true) LocalStorageCapacityIsolationFSQuotaMonitoring=true|false (ALPHA - default=false) MountContainers=true|false (ALPHA - default=false) NodeDisruptionExclusion=true|false (ALPHA - default=false) NodeLease=true|false (BETA - default=true) NonPreemptingPriority=true|false (ALPHA - default=false) PodOverhead=true|false (ALPHA - default=false) PodShareProcessNamespace=true|false (BETA - default=true) ProcMountType=true|false (ALPHA - default=false) QOSReserved=true|false (ALPHA - default=false) RemainingItemCount=true|false (BETA - default=true) RemoveSelfLink=true|false (ALPHA - default=false) RequestManagement=true|false (ALPHA - default=false) ResourceLimitsPriorityFunction=true|false (ALPHA - default=false) ResourceQuotaScopeSelectors=true|false (BETA - default=true) RotateKubeletClientCertificate=true|false (BETA - default=true) RotateKubeletServerCertificate=true|false (BETA - default=true) RunAsGroup=true|false (BETA - default=true) RuntimeClass=true|false (BETA - default=true) SCTPSupport=true|false (ALPHA - default=false) ScheduleDaemonSetPods=true|false (BETA - default=true) ServerSideApply=true|false (BETA - default=true) ServiceLoadBalancerFinalizer=true|false (BETA - default=true) ServiceNodeExclusion=true|false (ALPHA - default=false) StartupProbe=true|false (ALPHA - default=false) StorageVersionHash=true|false (BETA - default=true) StreamingProxyRedirects=true|false (BETA - default=true) SupportNodePidsLimit=true|false (BETA - default=true) SupportPodPidsLimit=true|false (BETA - default=true) Sysctls=true|false (BETA - default=true) TTLAfterFinished=true|false (ALPHA - default=false) TaintBasedEvictions=true|false (BETA - default=true) TaintNodesByCondition=true|false (BETA - default=true) TokenRequest=true|false (BETA - default=true) TokenRequestProjection=true|false (BETA - default=true) TopologyManager=true|false (ALPHA - default=false) ValidateProxyRedirects=true|false (BETA - default=true) VolumePVCDataSource=true|false (BETA - default=true) VolumeSnapshotDataSource=true|false (ALPHA - default=false) VolumeSubpathEnvExpansion=true|false (BETA - default=true) WatchBookmark=true|false (BETA - default=true) WinDSR=true|false (ALPHA - default=false) WinOverlay=true|false (ALPHA - default=false) WindowsGMSA=true|false (BETA - default=true) WindowsRunAsUserName=true|false (ALPHA - default=false) | |
| --hard-pod-affinity-symmetric-weight int32 Default: 1 | |
| DEPRECATED: RequiredDuringScheduling affinity is not symmetric, but there is an implicit PreferredDuringScheduling affinity rule corresponding to every RequiredDuringScheduling affinity rule. --hard-pod-affinity-symmetric-weight represents the weight of implicit PreferredDuringScheduling affinity rule. Must be in the range 0-100.This option was moved to the policy configuration file | |
| -h, --help | |
| help for kube-scheduler | |
| --http2-max-streams-per-connection int | |
| The limit that the server gives to clients for the maximum number of streams in an HTTP/2 connection. Zero means to use golang's default. | |
| --kube-api-burst int32 Default: 100 | |
| DEPRECATED: burst to use while talking with kubernetes apiserver | |
| --kube-api-content-type string Default: "application/vnd.kubernetes.protobuf" | |
| DEPRECATED: content type of requests sent to apiserver. | |
| --kube-api-qps float32 Default: 50 | |
| DEPRECATED: QPS to use while talking with kubernetes apiserver | |
| --kubeconfig string | |
| DEPRECATED: path to kubeconfig file with authorization and master location information. | |
| --leader-elect Default: true | |
| Start a leader election client and gain leadership before executing the main loop. Enable this when running replicated components for high availability. | |
| --leader-elect-lease-duration duration Default: 15s | |
| The duration that non-leader candidates will wait after observing a leadership renewal until attempting to acquire leadership of a led but unrenewed leader slot. This is effectively the maximum duration that a leader can be stopped before it is replaced by another candidate. This is only applicable if leader election is enabled. | |
| --leader-elect-renew-deadline duration Default: 10s | |
| The interval between attempts by the acting master to renew a leadership slot before it stops leading. This must be less than or equal to the lease duration. This is only applicable if leader election is enabled. | |
| --leader-elect-resource-lock endpoints Default: "endpoints" | |
| The type of resource object that is used for locking during leader election. Supported options are endpoints (default) and `configmaps`. | |
| --leader-elect-resource-name string Default: "kube-scheduler" | |
| The name of resource object that is used for locking during leader election. | |
| --leader-elect-resource-namespace string Default: "kube-system" | |
| The namespace of resource object that is used for locking during leader election. | |
| --leader-elect-retry-period duration Default: 2s | |
| The duration the clients should wait between attempting acquisition and renewal of a leadership. This is only applicable if leader election is enabled. | |
| --lock-object-name string Default: "kube-scheduler" | |
| DEPRECATED: define the name of the lock object. Will be removed in favor of leader-elect-resource-name | |
| --lock-object-namespace string Default: "kube-system" | |
| DEPRECATED: define the namespace of the lock object. Will be removed in favor of leader-elect-resource-namespace. | |
| --log-backtrace-at traceLocation Default: :0 | |
| when logging hits line file:N, emit a stack trace | |
| --log-dir string | |
| If non-empty, write log files in this directory | |
| --log-file string | |
| If non-empty, use this log file | |
| --log-file-max-size uint Default: 1800 | |
| Defines the maximum size a log file can grow to. Unit is megabytes. If the value is 0, the maximum file size is unlimited. | |
| --log-flush-frequency duration Default: 5s | |
| Maximum number of seconds between log flushes | |
| --logtostderr Default: true | |
| log to standard error instead of files | |
| --master string | |
| The address of the Kubernetes API server (overrides any value in kubeconfig) | |
| --policy-config-file string | |
| DEPRECATED: file with scheduler policy configuration. This file is used if policy ConfigMap is not provided or --use-legacy-policy-config=true | |
| --policy-configmap string | |
| DEPRECATED: name of the ConfigMap object that contains scheduler's policy configuration. It must exist in the system namespace before scheduler initialization if --use-legacy-policy-config=false. The config must be provided as the value of an element in 'Data' map with the key='policy.cfg' | |
| --policy-configmap-namespace string Default: "kube-system" | |
| DEPRECATED: the namespace where policy ConfigMap is located. The kube-system namespace will be used if this is not provided or is empty. | |
| --port int Default: 10251 | |
| DEPRECATED: the port on which to serve HTTP insecurely without authentication and authorization. If 0, don't serve plain HTTP at all. See --secure-port instead. | |
| --profiling | |
| DEPRECATED: enable profiling via web interface host:port/debug/pprof/ | |
| --requestheader-allowed-names stringSlice | |
| List of client certificate common names to allow to provide usernames in headers specified by --requestheader-username-headers. If empty, any client certificate validated by the authorities in --requestheader-client-ca-file is allowed. | |
| --requestheader-client-ca-file string | |
| Root certificate bundle to use to verify client certificates on incoming requests before trusting usernames in headers specified by --requestheader-username-headers. WARNING: generally do not depend on authorization being already done for incoming requests. | |
| --requestheader-extra-headers-prefix stringSlice Default: [x-remote-extra-] | |
| List of request header prefixes to inspect. X-Remote-Extra- is suggested. | |
| --requestheader-group-headers stringSlice Default: [x-remote-group] | |
| List of request headers to inspect for groups. X-Remote-Group is suggested. | |
| --requestheader-username-headers stringSlice Default: [x-remote-user] | |
| List of request headers to inspect for usernames. X-Remote-User is common. | |
| --scheduler-name string Default: "default-scheduler" | |
| DEPRECATED: name of the scheduler, used to select which pods will be processed by this scheduler, based on pod's "spec.schedulerName". | |
| --secure-port int Default: 10259 | |
| The port on which to serve HTTPS with authentication and authorization.If 0, don't serve HTTPS at all. | |
| --skip-headers | |
| If true, avoid header prefixes in the log messages | |
| --skip-log-headers | |
| If true, avoid headers when opening log files | |
| --stderrthreshold severity Default: 2 | |
| logs at or above this threshold go to stderr | |
| --tls-cert-file string | |
| File containing the default x509 Certificate for HTTPS. (CA cert, if any, concatenated after server cert). If HTTPS serving is enabled, and --tls-cert-file and --tls-private-key-file are not provided, a self-signed certificate and key are generated for the public address and saved to the directory specified by --cert-dir. | |
| --tls-cipher-suites stringSlice | |
| Comma-separated list of cipher suites for the server. If omitted, the default Go cipher suites will be use. Possible values: TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_RC4_128_SHA,TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_RC4_128_SHA,TLS_RSA_WITH_3DES_EDE_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA256,TLS_RSA_WITH_AES_128_GCM_SHA256,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_RC4_128_SHA | |
| --tls-min-version string | |
| Minimum TLS version supported. Possible values: VersionTLS10, VersionTLS11, VersionTLS12, VersionTLS13 | |
| --tls-private-key-file string | |
| File containing the default x509 private key matching --tls-cert-file. | |
| --tls-sni-cert-key namedCertKey Default: [] | |
| A pair of x509 certificate and private key file paths, optionally suffixed with a list of domain patterns which are fully qualified domain names, possibly with prefixed wildcard segments. If no domain patterns are provided, the names of the certificate are extracted. Non-wildcard matches trump over wildcard matches, explicit domain patterns trump over extracted names. For multiple key/certificate pairs, use the --tls-sni-cert-key multiple times. Examples: "example.crt,example.key" or "foo.crt,foo.key:*.foo.com,foo.com". | |
| --use-legacy-policy-config | |
| DEPRECATED: when set to true, scheduler will ignore policy ConfigMap and uses policy config file | |
| -v, --v Level | |
| number for the log level verbosity | |
| --version version[=true] | |
| Print version information and quit | |
| --vmodule moduleSpec | |
| comma-separated list of pattern=N settings for file-filtered logging | |
| --write-config-to string | |
| If set, write the configuration values to this file and exit. | |
Feedback
Was this page helpful?
Thanks for the feedback. If you have a specific, answerable question about how to use Kubernetes, ask it on Stack Overflow. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement.
Page last modified on December 13, 2019 at 7:51 PM PST by
Revert v1.17 release changes on v1.16 branch (#18123) (Page History)